High adherence, quick setting self-levelling compound.
NZ$40.52 Excl GST
QUILOSA LC-410 is a high adherence and quick setting self-levelling compound ideal for preparing and smoothing floors before laying lightweight flooring indoors.
COMMON USES
Used for levelling in layers of up to 10 mm, surfaces of cement, plaster, asphalt, old ceramic floor tiles and wooden substrates indoors. It is suitable for thicknesses from 2-10 mm It can be used for radiant floors without additives needing to be added.
PREPARATION
The floor must be consistent, smooth and firm and free from dust and grease. Any remains of paint or glue on the surface must be removed mechanically as far as is possible. Old ceramic floors must be energetically cleaned and sanded with an abrasive. Before applying the leveling compound QUILOSA LC-410, you may like to apply a primer on the surface: Thomsit R766.
APPLICATION
Pour 5.5 litres of water into a container for every sack of 25 kg of product. Mix until a fluid and homogeneous paste is obtained. Using a mechanical stirrer at 600 rpm is recommended. Leave the mixture for 5 minutes and mix it again for the paste to be ready to use. Pour the mixture onto the floor and spread it with a levelling bar until the recommended thickness is obtained. Surfaces may be more easily equalled using a level. For very thick surfaces, using a spiked roller is recommended. Do not mix a larger amount than can be applied in 25 - 30 minutes.
TECHNICAL FEATURES
Working time: Approximately 30 minutes at 20ºC Time before treading: 30 hours approximately Time before gluing coverings: 24 hours for thicknesses. Working temperature:> 5ºC Yield: Approximately 1.5 kg/m2.mm
COMMON USES
Used for levelling in layers of up to 10 mm, surfaces of cement, plaster, asphalt, old ceramic floor tiles and wooden substrates indoors.
It is suitable for thicknesses from 2-10 mm
It can be used for radiant floors without additives needing to be added.
PREPARATION
The floor must be consistent, smooth and firm and free from dust and grease.
Any remains of paint or glue on the surface must be removed mechanically as far as is possible.
Old ceramic floors must be energetically cleaned and sanded with an abrasive.
Before applying the leveling compound QUILOSA LC-410, you may like to apply a primer on the surface: Thomsit R766.
APPLICATION
Pour 5.5 litres of water into a container for every sack of 25 kg of product. Mix until a fluid and homogeneous paste is obtained. Using a mechanical stirrer at 600 rpm is recommended.
Leave the mixture for 5 minutes and mix it again for the paste to be ready to use.
Pour the mixture onto the floor and spread it with a levelling bar until the recommended thickness is obtained.
Surfaces may be more easily equalled using a level. For very thick surfaces, using a spiked roller is recommended.
Do not mix a larger amount than can be applied in 25 - 30 minutes.
TECHNICAL FEATURES
Working time: Approximately 30 minutes at 20ºC
Time before treading: 30 hours approximately
Time before gluing coverings: 24 hours for thicknesses.
Working temperature:> 5ºC
Yield: Approximately 1.5 kg/m2.mm