WL 2550 is an Interior/Exterior Crosslinking PVA that provides superior heat and moisture resistance over PVA and Aliphatic formulations. It is a water based, high viscosity PVA adhesive that has a D3 water resistance classification. Used for applications requiring a high viscosity, low slump and long working time. WL 2550 is suitable for where extended process times are required. Tan glue line when cured. Interior/Exterior use.
COMMON USES
WOODLOK 2550 is suitable for pressing of hollow or solid core doors or where extended process times are required.
Water based alternative to solvent based contacts.
BONDS Particleboard. MDF. Softwoods. Hardwoods. Commonly used for furniture and joinery.
ADVANTAGES
Meets International Standard EN-204 D3 for water resistance.
High viscosity, low slump and long working time.
PROPERTIES
Viscosity : 8,500cps
Solids : 42%
Open Time @ 20°C : 10min
APPEARANCE
Light tan when wet / Tan when dry
ODOUR
Slight PVA
CLEAN UP
Water whilst wet
COVERAGE
120gm—240gm m² of glue line is recommended depending on substrate.
Login
COMMON USES
- WOODLOK 2550 is suitable for pressing of hollow or solid core doors or where extended process times are required.
- Water based alternative to solvent based contacts.
BONDSParticleboard. MDF. Softwoods. Hardwoods. Commonly used for furniture and joinery.
ADVANTAGES
- Meets International Standard EN-204 D3 for water resistance.
- High viscosity, low slump and long working time.
PROPERTIES- Viscosity : 8,500cps
- Solids : 42%
- Open Time @ 20°C : 10min
APPEARANCE- Light tan when wet / Tan when dry
ODOUR- Slight PVA
CLEAN UP- Water whilst wet
COVERAGE- 120gm—240gm m² of glue line is recommended depending on substrate.
- 1 litre will cover approximately 10m2.
SIZES