WOODLOK 3150 Melamine Adhesive

NEW  WOODLOK 3150 is a high performance emulsion adhesive especially formulated for the bonding of synthetic laminated board (Melamine®) to MDF, timber, particleboard and other porous substrates. Cured adhesive is clear and forms a durable, high strength bond.

COMMON USES

• Especially formulated for the bonding of synthetic laminated board (Melamine®) to MDF, timber, particleboard and other porous substrates.
• Often used for products that require an elegant finish, e.g. cabinetmaking, doormaking, and shopfitting.
• Melamine panels are widely used in the home to provide a tidy and stylish veneer for wardrobes, drawers, shelves, kitchens, vanities, wall linings, and much more.
• Strong adherence to steel and aluminium sheets.

BONDS

• Melamine to MDF and board.
• Steel and aluminium sheets.

ADVANTAGES

• A modified acrylic adhesive for bonding melamine to other substrates.
• Can be applied in temperatures as low as 2ºC.
• Long working time for precision joining.
• Eliminates the need for nails and screws - no more cracks and splinters.
• Non-toxic.
• Easy clean up with water.

For a more comprehensive rundown of the advantages of Woodlok 3150, please read our

PROPERTIES

• Viscosity : 7,000cps
• Solids : 55%
• Open Time @ 20°C : 12min

PREPARATION

All surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish or other foreign material before gluing.

TECHNICAL DETAILS

• Chemical Description : A modified acrylic copolymer aqueous dispersion based adhesive.

APPLICATION METHOD

The most suitable application for this type of product is using a roller gluer, applying the adhesive on the board and then carrying out immediately the joining of the covering. It should then be uniformly pressed on the entire surface with a cold press for a minimum of 2 hours. Should it be wished to speed up drying, a hotplate press could also be used at a temperature of 60 - 70º C. The pressing time would need to be determined by testing previously.

APPEARANCE

• White when wet, clear when dry.

ODOUR

• Slight when wet. None when dry.

CLEAN UP

• With water when wet. Cured glue must be cut or scraped away.

COVERAGE

• 120gm—240gm m² of glue line is recommended depending on substrate.
• 1 litre will cover approximately 10m².

LIMITATIONS

Note : One surface must be porous.

SIZES

• 500ml Pro Bottle
• 5ltr Jerry