CANTAC ULTRA-TAC Aerosol Contact Adhesive 575ml
- Unit price
- / per
CANTAC ULTRA-TAC Aerosol Contact Adhesive 575ml
- Unit price
- / per
Description
PREPARATION
For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.
ODOUR
Minimal Solvent Odour
CLEAN UP
Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.
TESTING
Always test the suitability of the product for your application before use.
COVERAGE
5m2 per 575ml Aerosol Can, Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).
SIZES
- 575ml Aerosol
Specifications
Adding product to your cart
Specifications
- Bonds Insulation Material to Ducting, Bonds Building Wrap & Polystyrene to Steel Framing, Bonds Polystyrene to a Variety of Substrates, Bonds Carpet & Underlay, Tape Primer on Porous Surfaces, Formwork Construction
ULTRA-TAC will bond almost any substrate and remain permanently tacky, substrates include: duct insulation, steel, aluminium, fiberglass, Expanded Polystyrene Foam (EPS), polyester, MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, corflute and most plastics.
- Pressure Sensitive
- Single or Double
- Sided Application
- Polystyrene Safe
- Waterproof
- Long Open Time
- No Ozone Depleting Substances
- Low Odour
- High Coverage
- High Solids
- Two Way Adjustable Nozzle
ULTRA-TAC is not suitable for High Pressure Laminates (HPL) or applications requiring high strength due to its tacky & flexible glue line. For high strength bonds on polystyrene we recommend POLY-TAC. ULTRA-TAC is not suitable for vinyl flooring.
- Chemical Description: Solvent Based Contact Adhesive
- Solids Content: 40 - 46%
- Viscosity: Sprayable Grade
- Minimum Open Time: 1 - 5 minutes
- Maximum Open Time: 5 hours (best results within 1hr)
- Heat Resistance: -40 – +85ºC
- Cleaner: Citrus Cleaner or Acetone
- Flash Point: -41ºC
- Specific Density: 0.70kg per ltr +/- 5%
Testimonials
Nice friendly staff and they give you free gummies every time you get supplies from them 🤫
So helpful.
I asked about 3 different applications and was shown options for all 3.
I have purchased within my budget and am very pleased.
I will be returning for my next project!
Very professional business. Had an issue with a missing part and had terrific customer service. Keep up the good work!
Can highly recommend this company. Great advise and service and will be using them for all our future glueing needs.
Recommended products
NZ’s widest range of industrial adhesives
Premium Quality Guaranteed
Bulk, trade & wholesale prices