NZ-WIDE SHIPPING - FREIGHT FREE
cart Shopping Cart Shopping Cart
NZ’s Widest Range Of Industrial Adhesives
 
Premium Quality Guaranteed
 
Bulk & Wholesale
Prices
 

WL3150

WL3150

WOODLOK 3150 Melamine Adhesive

WOODLOK 3150 Melamine Adhesive
larger imageMove mouse over the image to magnify
WOODLOK 3150 Melamine Adhesive
Qty Size Description Price
500ml WOODLOK 3150 Melamine Adhesive, 500ml $11.40
26kg WOODLOK 3150 Melamine Adhesive, 26kg $253.60
5kg WOODLOK 3150 Melamine Adhesive 5ltr $78.15
NEW  WOODLOK 3150 is a high performance emulsion adhesive especially formulated for the bonding of synthetic laminated board (Melamine®) to MDF, timber, particleboard and other porous substrates. Cured adhesive is clear and forms a durable, high strength bond.

COMMON USES
  • Especially formulated for the bonding of synthetic laminated board (Melamine®) to MDF, timber, particleboard and other porous substrates.
  • Often used for products that require an elegant finish, e.g. cabinetmaking, doormaking, and shopfitting.
  • Melamine panels are widely used in the home to provide a tidy and stylish veneer for wardrobes, drawers, shelves, kitchens, vanities, wall linings, and much more.
  • Strong adherence to steel and aluminium sheets.
BONDS
  • Melamine to MDF and board.
  • Steel and aluminium sheets.

ADVANTAGES

  • A modified acrylic adhesive for bonding melamine to other substrates.
  • Can be applied in temperatures as low as 2ºC.
  • Long working time for precision joining.
  • Eliminates the need for nails and screws - no more cracks and splinters.
  • Non-toxic.
  • Easy clean up with water.
PROPERTIES
  • Viscosity : 7,000cps
  • Solids : 55%
  • Open Time @ 20°C : 12min
PREPARATION

All surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish or other foreign material before gluing.

TECHNICAL DETAILS
  • Chemical Description : A modified acrylic copolymer aqueous dispersion based adhesive.
APPLICATION METHOD

The most suitable application for this type of product is using a roller gluer, applying the adhesive on the board and then carrying out immediately the joining of the covering. It should then be uniformly pressed on the entire surface with a cold press for a minimum of 2 hours. Should it be wished to speed up drying, a hotplate press could also be used at a temperature of 60 - 70º C. The pressing time would need to be determined by testing previously.

APPEARANCE
  • White when wet, clear when dry.
ODOUR
  • Slight when wet. None when dry.
CLEAN UP
  • With water when wet. Cured glue must be cut or scraped away.
COVERAGE
  • 120gm—240gm m² of glue line is recommended depending on substrate.
  • 1 litre will cover approximately 10m2.
LIMITATIONS

Note : One surface must be porous.

SIZES
  • 500ml Pro Bottle
  • 5ltr Jerry

You might also be interested in ...

CUSTOMER SERVICE

Contact Us
Trade Accounts
Terms of Trade

 


 

 

Ph: +64 9 444 4878
Fax:

Email:

Shop:
+64 9 442 5972

enquiries@glueguru.co.nz

18 Kaimahi Road
Wairau Valley
Auckland 0627