Timber boat building. Also steel, aluminium and GRP.
Construction epoxy glue for bedding starter rods.
High strength coving (filleting) hole and gap filling.
Fabrication of wooden chairs and furniture subject to high stress.
When mixed, it is a similar shade to light coloured timbers. Varnish over without spoiling the natural timber effect. Will cure within 12 hours to a reinstatement condition at temperatures down to 5°C. Full cure approx. 3-7 days. Ideally in winter, a cover and an external source of heat should be used to warm the immediate work vicinity.
Not much dearer than mixing your own in material cost, but considerably faster and easier application process than traditional methods.
Easymix, 1:1 ratio by volume or weight.
Only mix enough for the job.
Non-shrink, non-slump, high impact resistance.
Non staining, solvent free.
Very high cohesive (internal) strength, essential in gap filling glue.
For best results, temperatures should be above 15°C for both the work area and the stock being used. Best bonds are obtained when moisture content ranges between 8% and 12%.
Glue Guru Epoxy Solvent or Acetone while wet. Cured glue must be cut, scraped or sanded away.
Terms of Trade