cart Shopping Cart Shopping Cart
NZ’s Widest Range Of Industrial Adhesives
 
Premium Quality Guaranteed
 
Bulk, Trade & Wholesale
Prices
 

TACPOLYC

TACPOLYC

CANTAC POLY-TAC Canister Adhesive Blue 13.8kg

CANTAC POLY-TAC Canister Adhesive Blue 13.8kg
larger imageMove mouse over the image to magnify
Enquire
POLY-TAC is an industrial strength, contact spray adhesive formulated for bonding Expanded Polystyrene Foam (EPS) to itself and many other materials. POLY-TAC can be sprayed directly onto EPS surfaces without damaging the foam. Superior bond strength properties and exceptional tack make POLY-TAC an excellent choice for permanent bonding of EPS.  Also excellent for general purpose bonding: plywood; MDF; metal; concrete: insulation and most construction materials.

POLY-TAC is sprayed through Cantac brand Guns & Hoses (Sold separately) - Click here to view.

POLY-TAC contains no toxic methylene chloride commonly present in competing products so it is much safer to apply.

COMMON USES
  • Bonds Rigid Insulation Panels, Tack Reinforcing Mesh to Foam, Bonds Polystyrene to a Variety of Substrates, Laminate, Multicore Panels
  • Manufacture of Whiteboards, Set Building, Formwork Construction
BONDS
POLY-TAC will effectively bond polystyrene, urethane foam, particleboard, MDF, timber, concrete, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, moulded fiberglass, and many other materials.

ADVANTAGES
  • Polystyrene Safe
  • Heat Resistant
  • Multipurpose
  • Waterproof
  • No Ozone Depleting Substances
  • Low Odour
  • High Coverage
  • High Solids
PREPARATION
For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.

TECHNICAL DETAILS
  • Chemical Description: Solvent Based Contact Adhesive
  • Solids Content: 38 - 44%
  • Viscosity: Sprayable Grade
  • Minimum Open Time: 1 - 5 minutes
  • Maximum Open Time: 5 hours (best results within 1hr)
  • Heat Resistance: -40 – +85ºC
  • Cleaner: Citrus Cleaner or Acetone
  • Flash Point: -41ºC
  • Specific Density: 0.70kg per ltr +/- 5%
APPLICATION METHOD
Sprayed through CANTAC brand Guns & Hoses (Sold separately) - Click here to view

APPEARANCE
  • Blue Sprayable Liquid
ODOUR
  • Minimal Solvent Odour

CLEAN UP
Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.

LIMITATIONS
POLY-TAC is not suitable for High Pressure Laminates (HPL). POLY-TAC is not recommended for Vinyl Flooring. TESTING Always test the suitability of the product for your application before use.

COVERAGE
15m2 per kg Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).

SIZES
  • 13.8kg Recyclable Canister
  • 575ml Aerosol

TECHNICAL DATA SHEET Download          SAFETY DATA SHEET Download

 

You might also be interested in ...

CUSTOMER SERVICE

Contact Us
Trade Accounts
Terms of Trade

 


 

 

Ph: +64 9 444 4878
Fax:

Email:

Shop:
+64 9 442 5972

enquiries@glueguru.co.nz

1016E Great South Road
Penrose
Auckland 1061