Epoxy Glue is a marine formulation, gap filling pregelled epoxy structural adhesive for gluing clean, sound substrates. A long open time with cure overnight, even at low temperatures, aids quick turnaround. Particularly suitable for bonding dissimilar substrates. A smooth and creamy paste with excellent hold-up on vertical surfaces. A versatile epoxy structural adhesive available in an easy to use one to one ratio, by volume or weight.
USE FOR Timber boat building. Also steel, aluminium and GRP. Construction epoxy glue for bedding starter rods. High strength coving (filleting) hole and gap filling. Fabrication of wooden chairs and furniture subject to high stress. When mixed, it is a similar shade to light coloured timbers. Varnish over without spoiling the natural timber effect. Will cure within 12 hours to a reinstatement condition at temperatures down to 5°C. Full cure approx. 3-7 days. Ideally in winter, a cover and an external source of heat should be used to warm the immediate work vicinity.
BENEFITS Considerably faster and easier than mixing your own thickened epoxy. Easymix, 1:1 ratio by volume or weight. Only mix enough for the job. Non-shrink, non-slump, high impact resistance. Non staining, solvent free. Very high cohesive (internal) strength, essential in gap filling glue.
TECHNICAL DETAILS
Chemical Description: Epoxy
Typical Viscosity: Gel
Coverage: 1m2 per kg (1mm thickness)
Open Time @ 20°C 20-30mins depending on coating weight
Cure Time @ 20°C 12 hrs (3-7 Days for full cure)
Shelf Life: 24 Months
APPLICATION METHOD For best results, temperatures should be above 15°C for both the work area and the stock being used. Best bonds are obtained when moisture content ranges between 8% and 12%.
APPEARANCE Semi Transparent
CLEAN UP Glue Guru Epoxy Solvent or Acetone while wet. Cured glue must be cut, scraped or sanded away.
Login
USE FOR
Timber boat building. Also steel, aluminium and GRP.
Construction epoxy glue for bedding starter rods.
High strength coving (filleting) hole and gap filling.
Fabrication of wooden chairs and furniture subject to high stress.
When mixed, it is a similar shade to light coloured timbers. Varnish over without spoiling the natural timber effect. Will cure within 12 hours to a reinstatement condition at temperatures down to 5°C. Full cure approx. 3-7 days. Ideally in winter, a cover and an external source of heat should be used to warm the immediate work vicinity.
BENEFITS
Considerably faster and easier than mixing your own thickened epoxy.
Easymix, 1:1 ratio by volume or weight.
Only mix enough for the job.
Non-shrink, non-slump, high impact resistance.
Non staining, solvent free.
Very high cohesive (internal) strength, essential in gap filling glue.
TECHNICAL DETAILS
APPLICATION METHOD
For best results, temperatures should be above 15°C for both the work area and the stock being used. Best bonds are obtained when moisture content ranges between 8% and 12%.
APPEARANCE
Semi Transparent
CLEAN UP
Glue Guru Epoxy Solvent or Acetone while wet. Cured glue must be cut, scraped or sanded away.
SIZES