High quality synthetic hot melt adhesive for high adhesion on difficult substrates.
ADVANTAGES
Very high adhesion on difficult substrates
High cold flexibility
High hot tack
PROPERTIES
Open time: medium - long
Setting time: short
High hot tack
Very high adhesion on difficult substrates
High mileage characteristics
TECHNICAL DETAILS
Viscosity: 1,800 – 2,600 cps / 160 °C
Softening point: 83 - 93°C
APPLICATION METHOD Application method: nozzle, wheel, plunger Recommended working temperature: 160 - 190 °C
APPEARANCE
White solid.
Granules in 25 kg PE-bags
ODOUR Very low odour hot. No odour cold.
CLEAN UP For the cold cleaning of surfaces on application equipment, conveyor belts or other machine parts, Melt-O-Clean can be applied. Melt-O-Clean is based on natural resources and facilitates manual cleaning even in case of pronounced charring. Before using Melt-O-Clean, its suitability for lacquered and synthetic coated surfaces should be tested.
Login
ADVANTAGES
- Very high adhesion on difficult substrates
- High cold flexibility
- High hot tack
PROPERTIES- Open time: medium - long
- Setting time: short
- High hot tack
- Very high adhesion on difficult substrates
- High mileage characteristics
TECHNICAL DETAILS- Viscosity: 1,800 – 2,600 cps / 160 °C
- Softening point: 83 - 93°C
APPLICATION METHODApplication method: nozzle, wheel, plunger Recommended working temperature: 160 - 190 °C
APPEARANCE
- White solid.
- Granules in 25 kg PE-bags
ODOURVery low odour hot. No odour cold.
CLEAN UP
For the cold cleaning of surfaces on application equipment, conveyor belts or other machine parts, Melt-O-Clean can be applied. Melt-O-Clean is based on natural resources and facilitates manual cleaning even in case of pronounced charring. Before using Melt-O-Clean, its suitability for lacquered and synthetic coated surfaces should be tested.
SIZES